M16 x 110mm Hexagon Bolt Sleeve Anchor ZYP Box of 10

Outside / Drill Diameter (mm) 16

Anchor Length (mm) 100

Thread Diameter (mm) 12

Maximum Fixture Thickness (mm) 40

Fixture Clearance Hole (mm) 18

Embedment Depth (mm) 55

Minimum Hole Depth (mm) 65

Structure Thickness (mm) 100

Installation Torque (Nm) 45

Mechanical Properties

Outside Diameter (mm) 10

Ultimate Tensile Strength (N/mm²) 400

Yield Strength (N/mm²) 280

Nut A/F (mm) 19

Washer Diameter (mm) 24

Installation Instructions

1. Position fixture and drill correct diameter hole to correct depth.

2. Clean hole by brushing and blowing to remove all dust and drilling debris.

3. Insert assembled anchor through fixture into concrete.

4. Tighten with torque wrench to recommended torque.

Non-Cracked concrete (Loads are not applicable to anchors with reduced embedment depth)

Performance Data (20/25 Concrete)

Outside Diameter (mm) 16

Characteristic Resistance (kN) Tensile 15.0

Characteristic Resistance (kN) Shear 15.2

Design Resistance (kN) Tensile 8.3

Design Resistance (kN) Shear 10.1

Recommended Resistance (kN) Tensile 5.9

Recommended Resistance (kN) Shear 7.2

Design Spacing (mm) Tensile & Shear 130

Design Edge Distance (mm) Tensile 90

Design Edge Distance (mm) Shear 100

Shear Loads towards a free edge are for single anchors where Spacing = 3 x Edge Distance

Solid Brickwork (Loads are not applicable to anchors with reduced embedment depth)

Performance Data (20N/mm²)

Outside Diameter (mm) 16

Characteristic Resistance (kN) Tensile 6.3

Characteristic Resistance (kN) Shear 13.6

Design Resistance (kN) Tensile 3.0

Design Resistance (kN) Shear 9.0

Recommended Resistance (kN) Tensile 2.2

Recommended Resistance (kN) Shear 6.4

Only 1 fixing per brick is recommended

Solid Concrete Blocks (Loads are not applicable to anchors with reduced embedment depth)

Performance Data (7N/mm²)

Outside Diameter (mm) 16

Characteristic Resistance (kN) Tensile 4.0

Characteristic Resistance (kN) Shear 8.0

Design Resistance (kN) Tensile 1.9

Design Resistance (kN) Shear 5.3

Recommended Resistance (kN) Tensile 1.4

Recommended Resistance (kN) Shear 3.7

Recommended Spacing (mm) Tensile & Shear 140

Recommended Edge Distance (mm) Tensile 70

Recommended Edge Distance (mm) Shear 95

Tightening Torque (Nm) 30

Due to the variable nature of bricks and concrete blocks these figures are for guidance only.