M12 x 125mm Hexagon Bolt Sleeve Anchor ZYP Box of 25

Outside / Drill Diameter (mm) 12

Anchor Length (mm) 115

Thread Diameter (mm) 10

Maximum Fixture Thickness (mm) 65

Fixture Clearance Hole (mm) 14

Embedment Depth (mm) 50

Minimum Hole Depth (mm) 65

Structure Thickness (mm) 100

Installation Torque (Nm) 35

Mechanical Properties

Outside Diameter (mm) 10

Ultimate Tensile Strength (N/mm²) 400

Yield Strength (N/mm²) 280

Nut A/F (mm) 17

Washer Diameter (mm) 21

Installation Instructions

1. Position fixture and drill correct diameter hole to correct depth.

2. Clean hole by brushing and blowing to remove all dust and drilling debris.

3. Insert assembled anchor through fixture into concrete.

4. Tighten with torque wrench to recommended torque.

Non-Cracked concrete (Loads are not applicable to anchors with reduced embedment depth)

Performance Data (20/25 Concrete)

Outside Diameter (mm) 12

Characteristic Resistance (kN) Tensile 12.6

Characteristic Resistance (kN) Shear 12.7

Design Resistance (kN) Tensile 6.9

Design Resistance (kN) Shear 8.4

Recommended Resistance (kN) Tensile 5

Recommended Resistance (kN) Shear 6

Design Spacing (mm) Tensile & Shear 115

Design Edge Distance (mm) Tensile 80

Design Edge Distance (mm) Shear 85

Shear Loads towards a free edge are for single anchors where Spacing = 3 x Edge Distance

Solid Brickwork (Loads are not applicable to anchors with reduced embedment depth)

Performance Data (20N/mm²)

Outside Diameter (mm) 12

Characteristic Resistance (kN) Tensile 4.4

Characteristic Resistance (kN) Shear 11.4

Design Resistance (kN) Tensile 2.1

Design Resistance (kN) Shear 7.6

Recommended Resistance (kN) Tensile 1.5

Recommended Resistance (kN) Shear 5.4

Only 1 fixing per brick is recommended

Solid Concrete Blocks (Loads are not applicable to anchors with reduced embedment depth)

Performance Data (7N/mm²)

Outside Diameter (mm) 12

Characteristic Resistance (kN) Tensile 2.9

Characteristic Resistance (kN) Shear 6.7

Design Resistance (kN) Tensile 1.4

Design Resistance (kN) Shear 4.4

Recommended Resistance (kN) Tensile 1.0

Recommended Resistance (kN) Shear 3.1

Recommended Spacing (mm) Tensile & Shear 120

Recommended Edge Distance (mm) Tensile 60

Recommended Edge Distance (mm) Shear 80

Tightening Torque (Nm) 20

Due to the variable nature of bricks and concrete blocks these figures are for guidance only.