M12 Plain Channel Nut – Bright Zinc Plated

This M12 plain channel nut is designed for securing brackets, components and accessories to standard 41mm strut channel systems.

The nut fits inside the channel profile and provides an M12 female thread for use with a suitable M12 bolt or set screw. Serrated edges engage with the returned edges inside the channel to create a secure fixing when tightened.

To install, insert the nut through the open face of the channel and rotate it through 90°. It can then be moved along the channel into the required position before the fixing is tightened.

Unlike short- or long-spring channel nuts, this plain channel nut does not have a spring attached. It is suitable for installations where a spring is unnecessary or where the nut can be positioned manually.

Manufactured from steel with a bright zinc plated finish, the channel nut is suitable for internal and suitably sheltered installations.

Key features

• M12 female thread
• Plain channel nut without a spring
• Manufactured from steel
• Bright zinc plated finish
• Serrated edges engage with the channel profile
• Simple insert-and-rotate installation
• Can be repositioned along the channel before tightening
• Suitable for standard 41mm-wide strut channel
• Suitable for 21mm and 41mm-deep channel
• Produced to comply with BS 6946
• Compliant with London Underground Standard 1-085

Typical applications

• Securing brackets to strut channel
• Electrical containment installations
• Cable tray and cable ladder supports
• Attaching conduit and pipework supports
• HVAC and mechanical service supports
• Trapeze support systems
• Equipment and plant supports
• General strut channel assembly

Product specification

Compatible components

This M12 channel nut can be used with suitable channel-system components, including:

• 41 x 21mm strut channel
• 41 x 41mm strut channel
• M12 bolts and set screws
• Compatible channel brackets
• Cantilever arms and base plates
• Cable containment supports
• Pipework and mechanical service supports

Bolts, brackets and other components are supplied separately unless specifically stated. Always check that the bolt length and channel-system components are suitable for the installation and required load.