Your shopping cart is empty!
Save or Merge Cart
Save/Print Cart
Login Required!
To save your cart for another time or print out, please click here to create account!
Outside / Drill Diameter (mm) 12
Anchor Length (mm) 70
Thread Diameter (mm) 10
Maximum Fixture Thickness (mm) 20
Fixture Clearance Hole (mm) 14
Embedment Depth (mm) 50
Minimum Hole Depth (mm) 60
Structure Thickness (mm) 100
Installation Torque (Nm) 35
Mechanical Properties
Outside Diameter (mm) 12
Ultimate Tensile Strength (N/mm²) 400
Yield Strength (N/mm²) 280
Nut A/F (mm) 17
Washer Diameter (mm) 21
Installation Instructions
1. Position fixture and drill correct diameter hole to correct depth.
2. Clean hole by brushing and blowing to remove all dust and drilling debris.
3. Insert assembled anchor through fixture into concrete.
4. Tighten with torque wrench to recommended torque.
Non-Cracked concrete (Loads are not applicable to anchors with reduced embedment depth)
Performance Data (20/25 Concrete)
Outside Diameter (mm) 12
Characteristic Resistance (kN) Tensile 12.6
Characteristic Resistance (kN) Shear 12.7
Design Resistance (kN) Tensile 6.9
Design Resistance (kN) Shear 8.4
Recommended Resistance (kN) Tensile 5
Recommended Resistance (kN) Shear 6
Design Spacing (mm) Tensile & Shear 115
Design Edge Distance (mm) Tensile 80
Design Edge Distance (mm) Shear 85
Shear Loads towards a free edge are for single anchors where Spacing = 3 x Edge Distance
Solid Brickwork (Loads are not applicable to anchors with reduced embedment depth)
Performance Data (20N/mm²)
Outside Diameter (mm) 12
Characteristic Resistance (kN) Tensile 4.4
Characteristic Resistance (kN) Shear 11.4
Design Resistance (kN) Tensile 2.1
Design Resistance (kN) Shear 7.6
Recommended Resistance (kN) Tensile 1.5
Recommended Resistance (kN) Shear 5.4
Only 1 fixing per brick is recommended
Solid Concrete Blocks (Loads are not applicable to anchors with reduced embedment depth)
Performance Data (7N/mm²)
Outside Diameter (mm) 12
Characteristic Resistance (kN) Tensile 2.9
Characteristic Resistance (kN) Shear 6.7
Design Resistance (kN) Tensile 1.4
Design Resistance (kN) Shear 4.4
Recommended Resistance (kN) Tensile 1
Recommended Resistance (kN) Shear 3.1
Recommended Spacing (mm) Tensile & Shear 120
Recommended Edge Distance (mm) Tensile 60
Recommended Edge Distance (mm) Shear 80
Tightening Torque (Nm) 20
Due to the variable nature of bricks and concrete blocks these figures are for guidance only.
(