The TR60 is a composite decking fixing designed for the TR60, TR60+, TR80 and TR80+ profiles manufactured by Structural Metal Decks (SMD). As with Lindapter's entire range of high quality, cost effective composite decking fixings, the Type TR60 is designed to fit inside the dovetail shaped re-entrant channel of the decking profiles for which it is designed.
Key Benefits
Fast, cost effective installation
No special tools required
No weakening of decking profiles
No damage to the surfaces of the decking
No possibility of delamination
Adjustable and easy to remove
Rod 4.6 M6
Safe Working Loads (3:1 Factor of Safety) Tensile / 1 Rod kN 1.0
Tightening Torque Nm 10
Step By Step Installation
1. Pre-assemble the locking plate and wedge (flat surface facing up) onto the threaded rod.
2. Insert wedge into the re-entrant channel of the decking and rotate until the chanfered cams engage on the sides of the channel.
3. Slide the plate up the threaded rod and over the wedge to lock it into position in the channel.
4. Tighten the locknut beneath the plate to hold the assembly in position.
Note: If the decking profile is deformed / distorted, the fixing should not be installed.