Adaptable high level fan heater for use as overdoor heater or general commercial space heater.
Ideal for shops and a wide range of commercial premises.
Smart modern appearance and manufactured to the highest possible quality.
Optional controller for variable output and fan only settings.
Input Supply: 220-240V
Dimensions (W x D x H) 635mm x 108mm x 225mm
Recommended Mounting Height: 1.8 - 3.0 Metre
Safety Distance From Heater: 1.5 Metre
Colour: White RAL9010 case with black grille
Finish: Epoxy polyester powder coating
Construction: 0.9mm steel case with white plastic end caps
Mounting: Dual function steel brackets providing vertical air discharge or angled air discharge (9kW models – vertical discharge only)
Alternatively 2 x M8 threaded holes are provided for suspension from drop rods
Tangential fan with low noise aluminium fan blades.
Shaded pole high performance motor.
Factory lubricated bearings (servicing not required)
Heating Element: High quality nickel-chrome resistance wire supported by ceramic plates and fitted with an automatically resetting over-temperature device.
Control (models with built-in thermostat)
On/off switch located on front panel.
Temperature control by factory fitted electronic thermostat with panel front adjustment.
Thermostat can switch heat and fan or heat only with fan running continuously. A switch is provided to select preferred mode.
Can be controlled by CS-7 wall mounted controller for on/off/high heat/low heat and fan only settings.
Control (models without thermostat)
Temperature control can be provided by a room thermostat.
Can be controlled by CS-7 wall mounted controller for on/off/high heat/low heat and fan only settings. CS-7 can be used in conjunction with a room thermostat.
2 rear mounted terminal enclosures provided (one for electrical supply and one for connection to remote-mounted control devices).
Links can be removed to reduce heater output (3kW to 2kW, 6kW to 4kW and 9kW to 6kW)
Guarantee: 1 year